Drying equipment
Rotary dryers and corresponding complexes are intended for drying and roasting various materials. The drying temperature depends on physical-mechanical properties of processed materials and can reach 900 °С. Our company offers rotary dryers with direct heat transfer (with PSP furnaces) and indirect heat transfer (with PSK furnaces).
PSP rotary dryers work using the principle of direct heat transfer and are the most widespread drying machines. Their design includes a loading chamber, rotating cylindrical tube with special internal blades/fins (depending on processed materials) transporting the materials and an unloading chamber.
Catalogue of PSP furnaces
You can buy our furnaces of any configurations: a separate furnace (with/without a burner) or a fully equipped drying complex including its loading equipment (screw, elevator, feeders, etc.), and also a specially provided burner calculated jointly with corresponding aspiration systems.
Drying equipment
Rotary dryers and corresponding complexes are intended for drying and roasting various materials. The drying temperature depends on physical-mechanical properties of processed materials and can reach 900 °С. Our company offers rotary dryers with direct heat transfer (with PSP furnaces) and indirect heat transfer (with PSK furnaces).
PSP rotary dryers work using the principle of direct heat transfer and are the most widespread drying machines. Their design includes a loading chamber, rotating cylindrical tube with special internal blades/fins (depending on processed materials) transporting the materials and an unloading chamber.
Catalogue of PSP furnaces
You can buy our furnaces of any configurations: a separate furnace (with/without a burner) or a fully equipped drying complex including its loading equipment (screw, elevator, feeders, etc.), and also a specially provided burner calculated jointly with corresponding aspiration systems.
Rotary dryer PSP-820/7-5
It is a complex of drying equipment on the basis of the furnace PSP-820/7-5 with a capacity of up to 5 t/h. It is equipped with a KP type burner and an aspiration system on the basis of the cyclone TZN-15-500х2UP.
Rotary dryer PSP-1220/8-10
It is a complex of drying equipment that includes a loading hopper, a chain elevator, a burner and an aspiration system. Its rotating tube with a diameter of 1.2 m and a length of 8 m provides its capacity of up to 12 t/h (of dry material).
Rotary dryer PSP-1600/9-15
The most powerful complex of drying equipment produced by our company. Capacity: 15 t/h (of dry material). Rotating tube diameter: 1.6 m, length: 9 m.
The most powerful complex of drying equipment produced by our company. Capacity: 15 t/h (of dry material). Rotating tube diameter: 1.6 m, length: 9 m.
Drying equipment
Drying machine with a working cone: SGK-37
Drying machine with a working cone (SGK-37) is intended for drying materials in the temperature range up to 200 0С, by the contact method of heat transfer (by blowing the mixed air heated by the burner and hot air from the top chamber).
Indirect heat transfer drying furnaces
Please see below standard configurations of indirect heat transfer furnaces from our company. Often, standard models are upgraded by our design office according to particular requirements of customers.
«Tula Machines» LLC offers drying furnaces at prices from 2,500,000 rubles.
Drying furnace PSK 630/5100
Indirect heat transfer rotary dryer for drying or roasting various materials
Exhaust gases of this furnace are relatively ecologically friendly products, therefore, they can be used, for example, for heating purposes. The machine can also be used jointly with air drying crushers.
Drying furnace PSK 630/10P
Indirect heat transfer rotary dryer (its flame does not contact processed materials). Its main advantage is preheating materials before roasting them (using the same heat carrier).
Areas of application of rotary dryers
Areas of application of rotary dryers are various, since they allow to process almost any raw materials and are used in various industries:
– building industry
– chemical industry
– heavy industry
– woodworking industry
– agriculture
The design of rotary dryers
The main working component of a rotary dryer (of PSK type) is its rotating tube roasting processed materials. The tube is equipped with a special system to feed the material: a loading chamber, from which all by-products (moisture, dust, etc.) are removed. Material is unloaded from an unloading hopper or through an open end of the rotating tube (depending on requirements). Material is to be fed into the furnace uniformly (it is possible to apply disk feeders for this purpose).
The principle of operation of rotary dryers
Materials are dried and roasted when there are transported by a rotary dryer’s rotating tube to its unloading chamber. Heating devices are located outside the tube. Thus, raw materials do not contact products of burning.
After processing, the materials pass through an unloading hole in the tube. Final products get into a special container or a transporting system.
Materials are dried and roasted inside a heat resistant rotating tube heated by a set of nozzles. The nozzles are located at edges of a furnace burner. At fuel burning hot air (moving to the center of the burner) heats the rest surface of the tube. The leaving the rotary dryer heat carrier can be exhausted without any aspiration systems (implying hot air purification). This heat carrier can be used for other purposes (for example, heating).
Due to a certain inclination of the tube and its rotation, the processed material is transported to its unloading end.
Scheme of operation of an indirect heat transfer rotary dryer:
Complete set (without a heat recuperator):